Common measures to improve efficiency in waste incinerators

1.Improve waste placement time

Before the waste goes into the incinerator, we should increase the time for the waste to sit, generally more than 5 days. Before incineration, completely disperse the moisture on the surface of the garbage, reduce the humidity of the garbage, reduce the harmful components in the garbage, prevent the garbage from burning completely, and more effectively reduce the garbage in the incinerator because of high humidity and can not burn, resulting in machine blockage or even shutdown.

2.Adjust the reasonable speed of garbage release

When waste is fed, the Angle between the hopper and the incinerator storage room should be reasonable to prevent uneven weight and density of waste when it enters the storage room. During the operation of the incinerator, the temperature, wind, garbage burning rate and other indicators in the incinerator are closely paid attention to, and the garbage feeding rate is determined according to these data. This can effectively prevent the damage of solid waste caused by fast feeding speed to the performance of the incinerator, improve the operation efficiency of the incinerator, and reduce unnecessary energy consumption in the operation process.

3.Complete garbage sorting in advance

Before entering the incinerator, if the garbage composition is too complex or chemical waste is too large, it is recommended to carry out simple classification treatment. Garbage of similar nature should be incinerated together, and different garbage should be incinerated separately. According to the different physical and chemical properties of the waste, different incineration schemes should be developed. Although the classified incineration method reduces the work efficiency of the waste incinerator, it ensures the operation efficiency of the incinerator and protects the related systems in the incinerator from the erosion and destruction of harmful flue gas.