Precautions for Cleaning Burner Components.
Remove dirt from the flame stabilization plate, open up gaps, and remove carbon deposits from the electrodes.
Use carburetor cleaner to clean oil nozzles, spray heads, tubing, suction tubing. If the oil pipe and suction pipe wall accumulated scale, use strip object to clean and through.
Remove the oil dirt on the heating wire and temperature sensor, and remove the oil mud at the bottom of the heating oil pool.
Clean the filter tank and filter screen, empty the oil storage tank, remove the bottom oily sludge, and clean the tank.
The purging function of the burner before and after starting is normal, but what is the reason for the failure to ignite?
(1) Insufficient gas supply at ignition
(2) Main solenoid valve or ignition electronic valve is not working properly
(3) Solenoid valve damage
(4) The supply pressure is unstable
(5) Excessive air volume