What are the Debugging Steps of the Burner?
1. Check whether the external gas supply is in place, whether the pipeline is unobstructed, and whether the external power supply control is normal.
2. Adjust the load of the burner to a small working load state, adjust the ignition position to a small working load state correspondingly, turn off the heavy load working state to ignite and observe the flame situation, and adjust the servo motor or damper and gas valve group according to the flame situation Adjust accordingly.
3. When adjusting the maximum flame output of the burner, it is necessary to gradually adjust from a relatively small load to a large load according to the load of the heat-consuming equipment, and adjust the servo motor or damper accordingly according to the situation.
4. Observe whether the flame deviates, whether the flame burns sufficiently, whether there is vibration, etc.
5. After the adjustment is completed, the ignition should be carried out several times to observe whether the ignition is good.
EBICO will attend Thailand's Premier Power Generation & Electric Exhibition...
How a bowl of Baixiang good noodles is born? About 1.8 million years ago, humans learned to cook food with purposeful control of fire. The use of fire has made unprecedented progress in human health and life, and Darwin also called cooking the most important invention of mankind after language....
