Home News Media Report

EBICO Launches Cold Flame Series Burner!

EBICO Launches Cold Flame Series Burner!
Jan 27, 2022 Page Views: 57 Author: EBICO Burner Font Size: S M L

Since its establishment, EBICO has insisted on "innovation and research", "lean improvement" and "transformation of scientific and technological achievements" to promote the competitiveness of the company, and is committed to consolidate the R&D capability and specialize in scientific research and innovation. With years of hard work, EBICO has a number of core patents, a first-mover advantage in the field of scientific research, and product technology ahead of industry development.

 

For the pursuit of technology and product innovation, EBICO always retains a passionate heart. In the project of heating for the Country Garden in Xining, Qinghai Province, the cold flame series burners were used creatively.

 

As a cutting-edge technology for burners, cold flame combustion technology refers to a pre-reaction phenomenon that occurs in the area of fuel ignition delay time, and the result of this pre-reaction can make the combustion NOX emission less than 9 ppm without any auxiliary system.

 

cold flame burner

 

This technology has a short combustion flame and a small furnace chamber, which can reduce the size of the equipment and adapt to more narrow working conditions under the same conditions and with the same emissions, thus saving 20-25% of raw materials and space.

 

In view of the difficulties and technical requirements of this project, three EF600G burners were selected, which are the latest models launched by EBICO, and have obvious advantages in environmental protection, space utilization and cost control.

 

cold flame burner

 

One-piece structure with high space utilization

 

The installation site of the Country Garden project is a basement, which is relatively narrow. The EBICO burner adopts a one-piece structure and combines with the vacuum furnace into a whole box type, which makes the space fully and effectively utilized.

 

cold flame burner

 

Excellent Pollutant Emission Control Capability

 

The outstanding environmental protection ability of EF series can effectively reduce NOx emissions without the need of FGR system. After continuous debugging by technicians, the pollutants were successfully controlled below 9ppm for the homeowners of the community.

 

cold flame burner

 

Perfectly cope with the impact of plateau environment

 

Qinghai Xining is located in the plateau area, with high altitude, low air pressure, thin air and low oxygen content, its unique geographical environment has a great impact on the normal operation of the burner.

 

1.low air pressure affects the density of the gas mixture and changes the range of the gas jet, which in turn affects the matching of the flame shape and size with the furnace structure.

2.The air density in Xining area is 1/4-1/3 lower than the standard state, which generally exceeds the adjustment range of the air-fuel ratio of the burner, and the combustion conditions are unstable

3.Due to the unstable combustion conditions, the rated output of the burner is directly affected.

4.Incomplete combustion under the condition of oxygen deficiency, so that the harmful components in the flue gas increase.

 

In response to the above four unstable working conditions, the EBICO personnel made plateau correction for the burner, which perfectly solved the effects of the above four kinds of plateau low pressure on the burner.

 

cold flame burner

 

Doing our best for customer satisfaction

 

The cold climate made the heating in the community urgent, so EBICO's commissioning staff went to the site to install the heating system, from the gas company to the electrical control docking, and assisted in the whole process of discussion and solution.

 

cold flame burner

 

Starting from R&D innovation to create more possibilities, EBICO never stops the pace of scientific research and innovation, tirelessly and persistently, keeping pace with the development of the times and building up the momentum to surpass!

Need more information about EBICO please contact us
More information?
Latest News
More
Mar 12, 2020

EBICO, the manufacture of corollary equipment for heating equipment(burners), participated in the exhibition with its ultra low-nitrogen new products and new technologies, and invited a number of guests to the new product release conference, witnessing the advent of EC...I type ultra low-nitrogen burners with them....

Jan 30, 2021

In January 2021, Sanya, China -- EBICO China Strategic Partnership Meeting was successfully held. EBICO Asia Pacific CEO Zhou Guoping, EBICO China General Manager Chen Liqin, EBICO China Channel Director Shen Chunhua and representatives of agents in various major regions gathered together to talk about the future of low nitrogen burner and look forward to the arrival of the new spring of 2021....

Mar 05, 2021

Recently, Manager Shao of the service department of the cooperative boiler manufacturer, Mr. Su of the technical department and his party were invited to EBICO Asia Pacific headquarters to conduct technical exchange activities....

Burner Products
Based on the experience of optimization and integration of combustion technology resources in Europe, we have achieved a safe, energy-saving and environmentally friendly burner that can be adapted to all thermal equipment.
Innovation
EBICO's attitude of pursuing excellence and continuous improvement promotes the innovation of burner products in safety, energy saving, environmental protection and intelligence.
About EBICO
We will optimize and integrate the combustion technology resources in Europe to form EBICO's unique cutting-edge strategic system to provide reliable products and services for global customers.
Focus on burners and equipment to lead the global thermal industry.
欧保(中国)环境工程股份有限公司版权所有 苏ICP备20014131号-1
Online
Email
Inquire