It is well known that the oil-gas burner can be used for both oil and gas. However, as the core supporting equipment of the thermal industry, the burner has inherent risk factors. Therefore, the burner must be operated in strict accordance with relevant specifications in order to minimize the risk of loss brought to customers by illegal operations.
1.Before ignition, it is necessary to confirm whether there is oil in the oil tank and whether the air is drained. Prolonged idling of the oil pump will cause oil pump wear.
2.Make sure that the return pipe is not blocked. It is strictly prohibited to install a valve in the return pipe to avoid damaging the seal of the oil pump by mistake.
3.when using a single pipe, be sure to remove the back oil of the bypass screw.
4.If the programmed control box alarm light is on, press the reset button again and wait for 20 seconds.
5.Make sure the forward and backward rotation of the fan during the initial adjustment, so as not to cause inversion of the oil pump.
6.When cleaning the oil pump, if rust is found in the pump, it indicates that water is contained in the fuel oil tank. It should be cleaned in time, otherwise the oil pump will be stuck or severely worn out.
EBICO will attend Thailand's Premier Power Generation & Electric Exhibition...
How a bowl of Baixiang good noodles is born? About 1.8 million years ago, humans learned to cook food with purposeful control of fire. The use of fire has made unprecedented progress in human health and life, and Darwin also called cooking the most important invention of mankind after language....
