A. If the light in the furnace is strong and light penetrates into the photosensitive tube of the burner in other places, the leakage should be eliminated in time.
B. No power input.
C. The program controller is damaged.
D. The oil circuit is blocked.
May 18, 2020
The burner to the boiler operation layer, the first turn on the burner casing and actuator is installed in the vent on the connecting flange of fastening bolts, good combination of oil gun and wear on the actuator, adjust good firing gun according to drawings and oil gun stretched out the length of the nozzle and the Angle of firing gun, bolted ticked with paint. After the fuel is put into operation, atomization test is carried out on the oil gun, and the installation of the combustion device is finished after reaching the requirements of the inspection standard.
May 18, 2020
Natural gas is a kind of acknowledged clean, efficient and high-quality energy, which has been widely used in chemical industry, electric power, urban heating and other industrial and civil fields. The complete combustion of natural gas will not produce any pollutants, and its large-scale application also conforms to the national policy guidance of "coal to gas" and "oil to gas". It can be predicted that natural gas burners will become one of the most widely used burners.
May 14, 2020
A complete hot water boiler burner usually consists of three parts: fuel nozzle, air distributor and combustion channel. The fuel nozzle is the component that supplies the fuel and prepares it for combustion. The role of the air distributor is to mix the combustion air and fuel well to form a stable and suitable flame shape. Function of combustion passage: The heat accumulated in the combustion passage refractory provides heat source for the root of the flame, accelerating the evaporation and ignition of fuel oil, which is conducive to the formation of a stable combustion.
May 14, 2020
Under the requirements of environmental policy, the thermal industry now also attaches great importance to energy conservation and emission reduction measures. Low nitrogen combustion technology has some advantages in environmental protection, but it also has some influence on the operation of boiler. Nox emission control has become an important standard to measure the quality of burner.
May 14, 2020
In the fuel burner, the two ends of the motor are connected with the wind impeller and the oil pump respectively and drive them to work at the same time. In the dual - oil - gas burner, divided into two motors, a drive impeller, another separate drive oil pump. Oco provides service of burner motor repair and replacement.
May 13, 2020
Gas burners are applicable to natural gas, liquefied petroleum gas and other gas fuels, which are more in line with the environmental protection trend compared to fuel burners. In case of malfunction of the burner, please call +86-510-85168739 to consult the technicians of Euroguarantee.
May 13, 2020
Low nitrogen burners classification burners are industrial oil-fired boilers, gas boilers, heat conduction oil furnaces, drying furnace above the important equipment, it ensures the stable ignition combustion and complete combustion of fuel and other processes, therefore, to inhibit NOx production must be started from the burner. The burner designed and developed by Eurocontrol allows you to control NOx emissions below 30mg/m3.
May 09, 2020
Asphalt mixing building burners are suitable for movable and fixed asphalt mixing building. The heat transfer method of combustion flame is direct contact with radiation. The flame shape control is short but the combustion chamber is designed with negative pressure. Technical features include low pressure oil supply, medium atomization; Multistage oxygen distribution; Low NOx emission; Disassembly and maintenance are convenient.
May 09, 2020
According to the principle of low-pressure atomization, it is common for burners to use heavy oil as fuel. When oil refineries provide poor quality oil products, general burners will have ignition difficulties, dense smoke, coking in the furnace, nozzle blockage and other problems. The residual oil burner can effectively avoid the related problems.
May 09, 2020
Burner is the key equipment of oil-fired boiler, which is composed of oil injection part (atomizer), air conditioner part, ignition and combustion stabilizing device, electrical system, motor and servo motor, etc. In order to make fuel oil burn well, it is necessary to improve the atomization quality of oil and make oil mist and air mix fully, which is mainly realized by means of burner. The electrical system consists of flame sensor, combustion program controller, fuel heating controller and so on. The motor servomotor provides power for the feng machine, oil pump, damper adjustment and oil return adjustment.
May 09, 2020
The commissioning of the gas burner should be carried out step by step, and rigorous tests should be carried out on the burner itself, fuel conveying system, air supply system and intelligent control system successively. The technical debugging staff of Euroguarantee will deliver the products to the customer after the debugging is qualified.
May 06, 2020
