A burner is a device that mixes fuel and air reasonably to make the fuel steady on fire and complete combustion. Burners can be divided into pulverized coal burners, oil burners and gas burners. Mainly used in petrochemical, thermal, electric power and other thermal industries.
Oct 16, 2019
Burners are widely used in thermal power, petrochemical, electric power, food and other industries, especially in the road engineering industry has a broad prospect of development. EBS and EI series burners designed and developed by EBICO can meet the specific needs of customers and are the "golden partner" of mobile and fixed asphalt mixing building.
Oct 16, 2019
The industry attribute of power industry determines the characteristics and characteristics of burners, including the regulation mode of burners, including: dc burner arrangement, burner outlet air and burner swing Angle and four Angle air distribution uniformity adjustment, to ensure the stable operation of burners.
Oct 16, 2019
For the wind system is an important part of the combustion system, the uniformity and stability of air and width directly affect the combustion effect and adjust the width.Considering the flow and temperature of the combustion air, and the pressure, the level of the installation location and maximum allowable specially making noise.
Oct 15, 2019
The burner to the boiler operation layer, the first turn on the burner casing and actuator is installed in the vent on the connecting flange of fastening bolts, good combination of oil gun and wear on the actuator, adjust good firing gun according to drawings and oil gun stretched out the length of the nozzle and the Angle of firing gun, bolted ticked with paint. After the fuel oil is put into service, atomization test is carried out on the oil gun.
Oct 15, 2019
EBICO provides safe light and heavy oil models with valve sets, fast automatic fuel cut off valves for burners, fast automatic cut off valves for tubing and gun purge, pressure controllers, pressure gauges and thermometers (heavy oil only), modular design for quick and easy installation.
Oct 15, 2019
The safety burner is generally composed of the following main parts: gas nozzle, gas valve system, fan, gas flow control valve, air control device, ignition device, gas pressure detection switch, air pressure detection switch and flame monitoring device. The burner shall be designed to meet the specified output power and performance requirements. The structure of the burner shall ensure that safety hazards such as instability, deformation or cracking do not occur.
Oct 15, 2019
Electronic intelligent digital burner is a new type of energy-saving combustion equipment designed and developed by EBICO. It adopts electronic intelligent proportional regulation, which has compact structure, stable combustion, large regulation ratio, low noise, and can be used to set fire gun and flame detection and alarm system. The flame spreads well, burns completely, burns easily and so on.
Oct 15, 2019
Integrated control system is an advanced control mode proposed earlier by EBICO and has been widely used in Europe and The United States. Its core idea is to integrate asphalt mixing building and automatic control of burner with unified programming for accurate data control. This control mode has obvious advantages
Oct 15, 2019
The heat-conduction oil furnace is a kind of equipment that uses the indirect heating of heat-transfer oil by burning the burner, forces the heat-transfer oil after the liquid-phase circulating heating through the circulation pump.
Oct 15, 2019
The hot blast stove directly or indirectly transfers the heat of pulverized coal to the heating equipment such as drying equipment, and is divided into two modes: circulation heat and non-circulation heat.
Oct 15, 2019
