The burner product chain includes several parts such as burner mainframe, burner system, burner accessories, etc. In view of the stability of the burner, the life of the burner mainframe is generally very long, while some key parts of the burner accessories will generate demand for repair and replacement due to wear and tear during long-term repeated use. The following kinds of burner accessories need regular maintenance.
1、Flame detector
Flame detectors are mainly used for monitoring gas or fuel flames. The flame detector is used to monitor the gas flame, yellow or blue fuel combustion flame and ignition spark calibration. The operator can monitor the flame signal generated by the UV radiation released from the gas or fuel flame through the flame detector, so as to ensure the smooth operation of the burner.
2、Gas solenoid valve
Gas solenoid valve is applicable to city gas, liquefied petroleum gas, natural gas and other gas for heating combustion medium safety emergency cut-off device. In the burner system, it can be connected with the gas leak alarm system or other intelligent alarm control terminal module, etc., to achieve on-site or remote automatic/manual emergency gas cut-off, to ensure the overall gas safety of the burner and heat equipment.
3、Ignition transformer
Ignition transformer is a device that can help the burner to provide enough energy to ignite pulverized coal, oil (gas) fuel in a flash and stabilize the flame. Mainly by the power supply, ignition coil, distributor, ignition switch, spark plug, additional resistance and its shorting device, high and low voltage wires and other components. Burner through the ignition transformer, low pressure to high pressure, in the small gap to produce discharge spark, so as to play the role of ignition.
4、Oil pressure sensor
Oil pressure sensor is an important part of the burner host system, used for pressure measurement and control, to measure the pressure to be measured accurately and timely transfer the test results to the subsequent display or control. Widely used in a variety of industrial self-control environment, involving water conservancy and hydropower, engineering machinery, aerospace, transportation, petrochemical, machine tools, pipelines and many other industries.
These are some of the burner accessories that must be maintained periodically after the burner is put into operation. If you want to know more about these parts, please visit our online parts mall at https://cn.ebico.com/parts/
Burner is a kind of precise thermal system supporting equipment, which has strict maintenance methods in the process of use.The following are several common burner failures and analysis....