Tianjin Markor Furniture Biomass-to-Gas Conversion

Application: Furniture production and facility heating

Project scale: Ten EP and ES Series burners covering approximately 48 MW

EBICO participated in the conversion of Markor Furniture’s original biomass combustion system to natural gas. Ten EP and ES Series burners were installed to meet both manufacturing and facility-heating requirements, with the full conversion completed within 90 days.

Before the retrofit, NOx emissions reached approximately 200 mg/Nm³. Following commissioning, emissions were reduced to below 30 mg/Nm³, with denitrification efficiency reaching up to 80%.

Sichuan Hongguang Special Chemical Coal-to-Gas Retrofit

Application: Continuous steam supply for specialty chemical production

Project scale: 25-ton-per-hour coal-to-gas conversion

The original coal-fired boiler system suffered from slow control response and insufficient steam output under full production loads. EBICO introduced low-NOx combustion technology and an automated control system to improve steam supply stability and production continuity.

Staged combustion and central mixing technologies helped suppress NOx formation. According to the project results, boiler thermal efficiency increased by 30%. Compatibility with the existing monitoring system and retained equipment also reduced the scope and cost of the retrofit.

SDIC Jieneng Zhoushan Gas-Fired Power Project

Application: High-load power generation and auxiliary thermal support

Burner solution: Customized EP8GE electronically modulated burner

For this H-class gas turbine combined-cycle project, EBICO configured an EP8GE burner and control system according to the site’s demanding load and operating requirements.

Electronic air-fuel ratio control provides stable combustion under changing loads, while the customized system supports peak-load operation and the project’s hydrogen-blending development direction. The solution demonstrates EBICO’s ability to serve large energy projects requiring high standards of safety, efficiency and control accuracy.

Geely Automotive Manufacturing Project

Application: Automotive coating drying and component production heating

Burner solution: Seven EP7GE burners

EBICO supplied seven EP7GE burners for Geely’s automotive manufacturing facility. The burners provide stable heat for high-temperature drying in the coating workshop and for thermal processes used in component production.

Multi-channel air and fuel distribution, central mixing and staged combustion deliver a combustion completion rate close to 100%. Field measurements showed NOx emissions below 30 mg/m³. Low-noise operation and control-system compatibility also allowed the burners to integrate with the factory’s intelligent production platform.

Shaanxi Baixiang Food Production Retrofit

Application: Food processing and production-line heat supply

Burner solution: EP-GE Series burners with PLC control

Baixiang Food selected EBICO EP-GE Series burners and a PLC control system for its Shaanxi production facility. Stable heat output helps maintain consistent processing conditions and reduces quality problems caused by uneven or fluctuating temperatures.

The burner system achieves combustion efficiency close to 100%, while the airflow design can reduce starting electricity consumption by up to 70%. Integrated low-NOx technologies control emissions below 30 mg/Nm³.

Xinjiang Hongguoguo Tomato Processing Plant

Application: Greenhouse heating and tomato drying

Burner solution: EP11GE burner with an integrated PLC control system

EBICO supplied an EP11GE burner solution to provide stable heat for greenhouse temperature control and tomato drying. The PLC system coordinates gas supply, combustion air and furnace temperature in real time, allowing heat output to respond to changing production conditions.

The completed system maintains NOx emissions below 30 mg/m³ while delivering uniform and reliable heat for both agricultural cultivation and tomato processing.