| Quantity: | |
|---|---|
Product Introduction
The EBICO Ball Valve is designed primarily for pipeline shutoff, isolation and flow switching in industrial systems.
It uses a floating-ball structure housed in a stainless steel valve body and connects to the pipeline through threaded ends. The DN15 to DN100 size range provides several options for matching different pipe diameters within burner systems and general process installations.
Operation is straightforward. Turning the lever through approximately 90° changes the valve between the open and closed positions, making the ball valve suitable where operators need clear and direct manual isolation.
Within an industrial combustion system, the ball valve can be used alongside other burner fittings to provide a manual isolation point for fuel or utility pipelines.
Unlike conventional valves used in low-demand systems, the EBICO Ball Valve is tailored for industrial lines that require:
Fast and accurate open/close control
Tight sealing with minimal leakage
Long service life under thermal stress
Low-torque actuation for easy operation
Resistance to corrosion and medium contamination
Its internal flow channel and quarter-turn operating structure enable precise handling of gases or liquids while minimizing flow resistance.
The EBICO Ball Valve adopts a pressure-responsive floating ball structure that automatically adjusts sealing force according to internal pipeline pressure. This self-compensating mechanism allows the valve to maintain tight shutoff performance even when operating conditions fluctuate.
This design delivers:
Highly stable sealing under changing load conditions
Lower friction between internal components
Reduced surface fatigue over long operating periods
Consistent opening torque throughout the service cycle
It is particularly effective in systems where frequent switching and pressure variation occur.
Engineered specifically for thermal environments, the EBICO Ball Valve maintains mechanical integrity in elevated temperature pipelines where ordinary valves tend to deform, leak, or lose structural rigidity.
This capability makes it suitable for:
Burner gas lines
Heating system loops
High-temperature process pipelines
Thermal oil and hot fluid distribution systems
The valve body and internal core are produced using high-grade stainless steel selected for its resistance to corrosion, oxidation, and mechanical stress. This material choice enables reliable operation in both chemically active and high-humidity industrial environments.
Structural benefits include:
Enhanced corrosion resistance
High mechanical strength
Long service life under continuous duty
Improved resistance to scaling and contamination
The EBICO Ball Valve utilizes a precision-machined threaded interface that allows direct installation into existing pipeline systems without welding. This reduces installation time and avoids thermal stress during assembly.
Connection advantages:
Rapid on-site installation
Simplified dismantling during system upgrades
Lower servicing cost
Compatibility with maintenance and retrofit projects
| Parameter | Description |
|---|---|
| Valve Structure | Floating Ball Type |
| Pressure Class | Suitable for Normal Pressure Pipelines |
| Operating Environment | High-Temperature Capable |
| Body Material | Stainless Steel |
| Nominal Diameter Range | DN 15 – DN 100 |
| Connection Interface | Threaded |
This specification configuration enables the EBICO Ball Valve to balance installation flexibility, mechanical reliability, and thermal endurance, making it adaptable to both compact and large-scale pipeline layouts.
The EBICO Ball Valve is developed for use in diverse industrial systems where flow isolation, medium distribution, and rapid shutoff are critical to process stability.
Used in burner supply lines, boiler circuits, and auxiliary thermal pipelines for precise flow interruption and safety isolation.
Applied in cooling water lines, auxiliary fuel circuits, and control pipelines within power generation and energy conversion systems.
Suitable for corrosive or temperature-sensitive chemical pipelines where valve material stability and sealing reliability are essential.
Its stainless-steel construction supports hygienic operation, helping reduce contamination risk in production environments with strict sanitary control.
Commonly deployed for liquid and gas shutoff, directional switching, and emergency isolation in general industrial networks.
The broad adaptability of this valve allows it to function reliably in both new installations and existing system upgrades.
Quarter-Turn Control Mechanism: Full opening and closing completed within a 90-degree rotation, supporting rapid flow response
Low-Resistance Actuation: Reduced torque demand minimizes operator fatigue and extends actuator service life
Fast Isolation Response: Enables immediate cutoff during emergency or process switching
Straight-Through Flow Path: Minimizes internal turbulence and helps maintain pipeline efficiency
Service-Oriented Internal Design: Simple internal layout supports fast inspection, cleaning, and part replacement
These operational characteristics ensure long-term performance stability in industrial environments with high operating frequency.
A DN size alone is not enough to define the correct ball valve.
Before selecting an EBICO Ball Valve, confirm the actual conditions of the pipeline.
Important information includes:
Confirm the required DN and corresponding connection dimensions.
Verify the thread standard used by the existing pipework or new installation.
Identify whether the line carries natural gas, another gas, fuel, water or another process medium.
Provide normal and maximum operating pressure rather than relying only on a general pipeline description.
Temperature
Confirm both normal and maximum medium temperatures.
Material requirements
If the project specifies a particular stainless steel grade or sealing material, state it during the inquiry.
Operating function
Determine whether the valve will be used only for isolation or whether the process actually requires flow modulation.
These checks are particularly important when the ball valve is being purchased as a replacement for an existing component.
Correct installation helps prevent avoidable stress on the valve and pipeline.
Before installation, check that the pipe connection is clean and correctly aligned. Foreign material inside the pipe should be removed before the valve is placed into service.
During assembly, avoid using excessive force that could damage the threaded ends or introduce unnecessary stress into the valve body.
The handle should remain accessible after surrounding components are installed.
During routine inspection, operators can check:
Handle and stem movement
Threaded joints
External signs of leakage
Corrosion or contamination around the body
Valve position during isolation procedures
If the valve becomes difficult to operate or shows abnormal leakage, the operating conditions and internal sealing components should be inspected before continued use.
A ball valve is usually one component within a larger combustion or fuel-delivery system.
EBICO supplies a range of burner fittings including ball valves, gas butterfly valves, solenoid valves, ignition transformers, servo motors and installation components. Selecting these components as part of the overall burner system helps engineers consider their function and interface together rather than treating each item independently.
EBICO also maintain strict quality management and testing and provide reliable service support throughout industrial combustion projects.
The EBICO Ball Valve is primarily positioned as an on/off isolation valve. If continuous throttling or precise flow control is required, confirm whether another valve type is more suitable for the application.
The current product specification identifies the connection as threaded but does not state a specific thread standard. Confirm the required BSP, NPT or other thread specification before ordering.
The published specification states stainless steel but does not identify a specific material grade. If your project requires a defined stainless steel grade, include this requirement in the inquiry.
The product is described for high-temperature-capable environments, but no numerical temperature limit is published on the current specification. Medium temperature, pressure and seal compatibility should therefore be confirmed before use.
A ball valve is commonly selected for direct on/off isolation. A butterfly valve may be more appropriate where the burner system requires flow regulation or modulation. The correct choice depends on the pipeline function and control requirements.
Provide the required DN size, thread standard, operating medium, normal and maximum pressure, operating temperature, required material grade if applicable, quantity and details of the system in which the valve will be installed.
Contact Us
Tell EBICO about your pipe size, connection and operating conditions. Our team can review your requirements and help confirm a suitable stainless steel threaded ball valve configuration for your burner or process pipeline.
DN size · Thread specification · Operating medium · Working pressure · Maximum temperature · Required stainless steel grade, if specified · Quantity · Existing valve information for replacement projects
