| Quantity: | |
|---|---|
Product Introduction
The EP-W Series Burner is a standard industrial combustion unit developed specifically for waste incineration systems. It is engineered to meet the demanding thermal, safety, and environmental requirements of solid waste, medical waste, hazardous waste, and sludge incineration applications.
Unlike general-purpose burners used for boilers or heating equipment, the EP-W series is optimized for high-temperature furnaces, continuous operation, and variable combustion conditions common in waste destruction processes. It delivers stable ignition, consistent flame formation, and reliable output under long-term high-load operation.
As a standardized gun-type duoblock burner, the EP-W series offers a balanced combination of structural stability, combustion efficiency, and environmental performance, making it a dependable heat source for modern incineration facilities.
Features & Benefits
The EP-W Series is engineered around four fundamental development philosophies: Safety, Environmental Protection, Energy Saving, and Intelligence. These principles are not abstract design slogans—they form the foundation of every technical decision made for this burner series, especially for the demanding and sensitive conditions found in waste incineration facilities.
Safety is treated as the primary priority. The system incorporates stable ignition sequencing, continuous flame supervision, and layered protective interlocks. These ensure that startup, full-load operation, and shutdown processes remain controlled and secure, even under unstable furnace conditions, fluctuating feed rates, or sudden load changes.
Environmental Protection is addressed through precise combustion control that promotes clean fuel burning. By stabilizing flame structure and combustion temperature, the system significantly reduces visible smoke formation, suppresses unpleasant odors, and supports compliance with stringent local and international emission regulations.
Energy Saving is achieved through optimized fuel-to-air matching and efficient heat release management. This minimizes unnecessary fuel waste while maintaining consistent thermal conditions in the incinerator, helping plants reduce long-term operating costs without compromising throughput.
Intelligence is embedded into the system architecture. The EP-W Series supports fully automated operating logic that allows stable performance over continuous incineration cycles. Digital control enables accurate flame regulation, automatic fault response, and seamless integration into plant-wide control systems.
Together, these four principles ensure that the EP-W Series provides clean, stable, and energy-efficient combustion performance for environmentally focused waste treatment applications.
The EP-W Series adopts a gun-type duoblock mechanical layout, in which the combustion air fan and the burner body are installed as physically independent units rather than as a single compact assembly. This separation allows each functional module to operate under optimized conditions, rather than being constrained by integrated space limitations.
Compared with monoblock designs, this structure offers greater flexibility in airflow organization, combustion adjustment, and heat distribution management. It also allows the fan and combustion head to be positioned according to real furnace geometry rather than fixed mounting constraints.
Key structural characteristics include:
Independent air supply system and combustion head configuration
Strong tolerance to furnace back pressure and airflow resistance
Improved thermal dissipation under sustained high-temperature operation
Stable performance during long-duration continuous duty cycles
This structural arrangement is especially suitable for medium and large-scale waste incineration systems, where stable flame behavior and precise thermal control are essential for maintaining steady furnace conditions.
Waste incinerators operate under some of the most severe conditions in industrial combustion: extreme temperature gradients, heavy dust loading, unstable furnace pressure, and highly variable waste calorific values. Under such conditions, structural adaptability and combustion stability become far more critical than compactness.
The duoblock configuration offers several decisive advantages in these environments:
Enhanced adaptability to continuous furnace pressure fluctuations
More flexible and responsive air volume regulation
Stronger flame rigidity inside deep and extended combustion chambers
Greater operational reliability during 24-hour non-stop operation
Because airflow generation and combustion formation are independently optimized, the EP-W Series maintains stable flame structure even during rapid waste feeding changes and sharp thermal disturbances. This ensures consistent heat release, reliable waste destruction efficiency, and long-term operational stability.
The EP-W Series is equipped with a standard multi-fuel combustion configuration, allowing it to operate with a wide range of commonly available industrial fuels:
Natural Gas (NG)
Liquefied Petroleum Gas (LPG)
Light Oil
Heavy Oil
This broad fuel compatibility enables waste incineration plants to select the most appropriate energy source based on local fuel accessibility, economic considerations, emission strategy, and emergency backup planning.
In waste treatment facilities, both fuel stability and energy cost control are key long-term operational concerns. Multi-fuel capability directly supports these objectives by providing:
Reliable operation even when primary fuel supply becomes unstable
Reduced dependence on a single energy infrastructure
Smooth and secure switching between gaseous and liquid fuels
Increased redundancy for emergency and standby operation
This adaptability not only improves system resilience but also allows operators to optimize operating costs under fluctuating fuel market conditions. As a result, the incineration process remains reliable, economical, and flexible over the entire project lifecycle.
The EP-W Series is specifically designed to support the strict environmental management objectives of modern waste incineration plants, where combustion stability directly affects pollutant formation and flue gas quality.
Key environmental performance characteristics include:
Stable high-temperature flame that promotes complete oxidation of waste materials
Suppressed formation of black smoke and incomplete combustion by-products
Improved thermal uniformity within the furnace chamber, supporting effective dioxin suppression
Creation of favorable upstream conditions for downstream flue gas purification equipment
By ensuring a clean, stable, and well-controlled combustion environment inside the furnace, the EP-W Series contributes directly to lower emission risk, improved environmental safety, and higher overall incineration efficiency.
Technical Parameters
To meet the complex operating demands of waste incineration and high-duty combustion systems, the EP-W Series is configured with a robust mechanical structure and broad fuel adaptability.
Its core technical setup is designed to balance structural stability, fuel flexibility, and standardized integration, ensuring that the burner can be deployed reliably across different furnace layouts and energy supply conditions. The following parameters define the fundamental configuration basis of the EP-W Series:
| Style | Gun Type Duoblock Burner |
| Fuel | Natural Gas, LPG, Light Oil, Heavy Oil |
| Type | Standard Burner |
Application
The EP-W Series Burner is widely deployed in various waste treatment and thermal destruction systems, including:
Municipal Solid Waste Incineration Plants
Medical Waste Incinerators
Hazardous Waste Disposal Furnaces
Industrial Solid Waste Treatment Systems
Sludge Incineration Units
Thermal Oxidation Systems for Waste Gas
In large-scale municipal waste incineration facilities, the EP-W Series provides stable auxiliary combustion support for furnace startup, temperature reinforcement, and steady-state operation. Its controlled flame formation ensures that waste materials reach and maintain the required oxidation temperature, improving combustion completeness and supporting consistent flue gas treatment performance.
Medical waste contains high-risk biological and chemical components that require precise thermal destruction under strictly controlled conditions. The EP-W Series offers stable ignition, continuous flame regulation, and reliable thermal output, ensuring that infectious materials are fully neutralized while maintaining compliance with hospital and public health emission standards.
Hazardous waste often exhibits irregular calorific values and unstable chemical composition. The EP-W Series burner stabilizes furnace temperature during these fluctuations, maintaining reliable combustion conditions for safe decomposition of toxic materials. Its multi-fuel capability also provides operational resilience for facilities with complex fuel supply strategies.
For industrial by-products and solid processing residues, the EP-W Series delivers uniform heat input and long-duty operational stability, allowing waste streams to be processed continuously without frequent shutdowns. This supports efficient material destruction while minimizing thermal shocks to the furnace structure.
Sludge disposal requires high thermal intensity and persistent flame support due to high moisture content and low inherent combustibility. The EP-W Series ensures sufficient flame rigidity and temperature stability to sustain effective moisture evaporation and organic decomposition throughout the incineration cycle.
In thermal oxidation units used for industrial exhaust gas treatment, the EP-W Series functions as the primary heat source driving volatile organic compound (VOC) decomposition. Stable high-temperature output supports efficient gas oxidation while maintaining favorable conditions for downstream environmental control equipment.
Across all these scenarios, the EP-W Series consistently delivers stable high-temperature combustion, continuous-duty reliability, and controlled emission behavior. These operating characteristics directly correspond to the stringent requirements imposed on modern waste treatment and thermal destruction projects, making the EP-W Series a dependable combustion solution for environmentally regulated applications.
